M. Yang, S. Kainuma, J. Xie, W. Liu and Y. Liu:Bond Behavior between CFRP and Corroded Steel Plate Associations with Surface Treatments, Composites Part B, Vol.246, 110280, 2022.
Journal of Cleaner Production (IF: 11.1)
Q. Wang, S. Kainuma, S. Zhuang, K. Shimizu and M. Haraguchi : Laser Cleaning on Severely Corroded Steel Members: Engineering Attempt and Cleanliness Assessment, Journal of Cleaner Production,
Vol.376, 134224, 2022.
Advanced Materials Technologies (IF: 8.9)
L. Liu, C.N. Xu, A. Yoshida, D. Tu, N. Ueno, S. Kainuma : Scalable Elasticoluminescent Strain Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis, Advanced Materials
Technologies, 1800336, 2018.
Corrosion Science (IF: 8.3)
J. Tang, M. Yang, S. Kainuma. Electrochemical interaction behaviours between adjacent coating defects in steel structure associated with corrosion acceleration effects. Corrosion Science,
2023.
Construction and Building Materials (IF: 7.4)
Lianheng Cai, Muye Yang, Shigenobu Kainuma, Yan Liu. Investigation on bonding behavior between CFRP patch and corrosion-damaged steel associated with surface preparation techniques.
Construction and Building Materials, 2023.
Y. Gao, S. Kainuma, M. Yang, and S. Ishihara and D. Inoue : Galvanic Corrosion Behavior of Hot-Dip Al and 55Al–Zn Coatings Applied to Steel Bolted Joints in Atmospheric Environments
Construction and Building Materials, Vol.401, 132694, 2023.
S. Kainuma, M. Yang, Y. Gao and M. Hashimoto : Long-Term Deterioration Mechanism of Hot-Dip Aluminum Coating Exposed to A Coastal-Atmospheric Environment, Construction and Building Materials,
Vol.280, pp.1-16, 2021.
S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi and T. Asano : Characterizing Corrosion Properties of Carbon Steel Affected by High-Power Laser Cleaning, Construction and Building
Materials, Vol.274, pp.1-11, 2021.
M. Yang, S. Kainuma, S. Ishihara, A. Kaneko and T. Yamauchi : Atmospheric Corrosion Protection Method for Corroded Steel Members Using Sacrificial Anode of Al-based Alloy, Construction &
Building Materials, Vol.234, pp.1-12, 2020.
S. Kainuma, M. Yang, S. Ishihara, A. Kaneko and T. Yamauchi : Corrosion Protection of Steel Members Using An Al-Zn Base Sacrificial Anode and Fiber Sheet in An Atmospheric Environment,
Construction & Building Materials, Vol.224, pp.880-893, 2019.
Y. S. Jeong, S. Kainuma and J. H. Ahn : Structural Response of Orthotropic Bridge Deck Depending on the Corroded Deck Surface, Construction & Building Materials, No.43, pp.87-97, 2013.
Materials Science & Engineering: A (IF: 6.4)
S. Kainuma, J. H. Ahn and Y. S. Jeong : Investigation on The Stress Concentration Effect at The Corroded Surface Achieved by Atmospheric Exposure Test, Materials Science & Engineering: A,
Vol.602, No.25, pp.89-97, 2014.
Thin-Walled Structures (IF: 6.4)
J. H. Ahn, S. Kainuma, I. T. Kim : Shear Failure Behaviors of A Web Panel With Local Corrosion Depending on Web Boundary Conditions, Thin-Walled Structures, Vol.73, pp.302-317, 2013.
Journal of Building Engineering (IF: 6.4)
S. H. Park, S. Kainuma, M. Yang, A. Kim, T. Ikeda, Y. Toyota and T. Arakawa : Advancements in Abrasive Water-Jet Treatment for Efficient Surface Cleaning and Comprehensive Corrosion Removal
in Steel Structures, Journal of Building Engineering, Vol.84, 108623d, 2024.
Composite Structures (IF: 6.3)
M. Yang, J. Xie, S. Kainuma and W. Liu : Improvement in Bond Behavior and Thermal Properties of Carbon Fiber-Reinforced Polymer Strengthened Steel Structures, Composite Structures, Vol.278,
pp.1-15, 2021.
Steel and Composite Structures (IF: 6.1)
S. Kainuma, Y. S. Jeong and J. H. Ahn : Stress Distribution on the Real Corrosion Surface of the Orthotropic Steel Bridge Deck, Steel and Composite Structures, Vol.18, No.6, pp.1479-1492,
2015.
International Journal of Fatigue (IF: 6.0)
L. Fang, Z. Q. Fu, B. H. Ji and S. Kainuma : Research on Mixed Mode Crack Drilling Under Out-Of-Plane Shear in Steel Bridge Deck, International Journal of Fatigue, Vol.156, 106679, pp.1-12,
2022.
Z. Y. Zhou, B. Ji, Z.Fu, S. Kainuma and S. Tsukamoto : Fatigue Crack Retrofitting by Closing Crack Surface, International Journal of Fatigue, Vol.119, 229-237, 2019.
S. Kainuma and T. Mori: A Study on the Fatigue Crack Initiation Point of Load-Carrying Fillet Welded Joints, International Journal of Fatigue, Vol.30, Issue 9, pp.1669-1677, 2008.
S. Kainuma, H. Katsuki, I. Iwai and M. Kumagai: Evaluation of Fatigue Strength of Friction Stir Butt-Welded Aluminum Alloy Joints Inclined to Applied Cyclic Stress, International Journal of
Fatigue, Vol.30, Issue 5, pp.870-876, 2008.
S. Kainuma and T. Mori: A Fatigue Strength Evaluation Method for Load- carrying Fillet Welded Cruciform Joints, International Journal of Fatigue, Volume 28, Issue 8, pp.864-872, 2006.
S. Kainuma and I .T. Kim: Fatigue Strength Evaluation of Load- Carrying Fillet Welded Cruciform Joints with Different Plate Thickness, International Journal of Fatigue, Vol.27, pp.810-816,
2005.
Measurement (IF: 5.6)
Shigenobu Kainuma, Young-Soo Jeong, Muye Yang, Susumu Inokuchi: Welding residual stress in roots between deck plate and u-rib in orthotropic steel decks, Measurement, 2016, Vol.92,
pp.475-482.
学術論文
2024
L. Cai, M. Yang, S. Kainuma and Y. Liu: Chloride-induced durability deterioration mechanism at interface between CFRP and pitting-corroded steel with optimized surface preparation.
Construction and Building Materials, 2024.07.08 (in press) (IF: 7.4)
J. Tang and M. Yang: Effects of Solution Temperature on the Galvanic Corrosion Between Carbon Fiber and Carbon Steel SM490A. International Journal of Steel Structures, 2024.07.05 (in press)
楊沐野, 謝嘉靖, 貝沼重信, Cai Lianheng, 唐堅: 鋼部材と炭素繊維シートの接着特性に及ぼす素地調整法と養生温度の影響, 土木学会論文集, 2024.06 (in press)
T. Nagai, H. Yamanaka, A. Nishikawa, H. Nonaka and S. Kainuma : Reproduction of Fissure Corrosion and Mechanism for Fissure Formation on Ductile Cast Iron, 66666, Engineering Failure
Analysis, 2024. (IF:4.0)
J. Xu, M. Yang, S. Kainuma and D. Inoue: Fundamental Study on Cotton-like Fiber Acting as Electrolyte Carriers in the Sacrificial Anode Cathodic Protection System for Closed-Section Steel
Structures under Atmospheric Environments, International Journal of Electrochemical Science, Vol.19, 100518 , 2024. (IF:1.5)
S. H. Park, S. Kainuma, M. Yang, A. Kim, T. Ikeda, Y. Toyota and T. Arakawa : Advancements in Abrasive Water-Jet Treatment for Efficient Surface Cleaning and Comprehensive Corrosion Removal
in Steel Structures, Journal of Building Engineering, Vol.84, 108623d, 2024. (IF: 6.4)
J. Xu, M. Yang, S. Li, S. Kainuma, B. Ji and S. Murayama : Application of Cathodic Protection Method on Steel Structures using Sacrificial Anode and Sodium Polyacrylate-Sodium Carboxymethyl
Cellulose (PANa–CMC) Hydrogel Electrolyte, Case Studies in Construction Materials, 2023. (IF: 6.2)
J. Tang, M. Yang and S. Kainuma : Electrochemical interaction behaviours between adjacent coating defects in steel structure associated with corrosion acceleration effects, Corrosion Science,
2023. (IF: 8.3)
L. Cai, M. Yang, S. Kainuma and Y. Liu : Investigation on Bonding Behavior between CFRP Patch and Corrosion-damaged Steel Associated with Surface Preparation Techniques, Construction and
Building Materials, Vol. 411, 134279, 2023. (IF: 7.4)
J. Xie, M. Yang and S. Kainuma : Investigation on Irreversible Deterioration Mechanism of CFRP–Steel Adhesive Joint Based on the Hydrothermal Aging Behavior of Resin Matrix, Structures,
Vol.58, 105581, 2023. (IF : 4.1)
L. Cai, M. Yang and S. Kainuma : Effects of Interfacial Defects on Plate-End Shear Stress in Bonded Joints of CFRP-Corroded Steel, 土木構造・材料論文集, Vol.39, 2023.
Q. Wang, S. Kainuma, S. Zhuang and M. Haraguchi : Preliminary Investigation on Effect of Continuous Wave Laser Treatment on the Adhesion and Durability of Rc-I Heavy-Duty Paint Coated Carbon
Steel, Case Studies in Construction Materials, Vol.19, e02420, 2023. (IF : 6.2)
Y. Gao, S. Kainuma, M. Yang, and S. Ishihara and D. Inoue : Galvanic Corrosion Behavior of Hot-Dip Al and 55Al–Zn Coatings Applied to Steel Bolted Joints in Atmospheric Environments
Construction and Building Materials, Vol.401, 132694, 2023. (IF: 7.4)
M. Yang, S. Kainuma, W. Niu and J. Xie,:Evaluation of Influence Factors for Galvanic Corrosion Coupled Between Carbon Fiber Cloth and Carbon Steel, Zairyo-to-Kankyo, Vol.72, 202-211, 2023.
S. H. Park, S. Kainuma, T. Ikeda, Y. Toyota and Y. Morita : Effect of Surface Characteristics of Abrasive Water-jet Treatment on Corrosion Behavior of Carbon Steel, Zairyo-to-Kankyo, Vol.72,
No.5, pp.169-178, 2023.
Q. Wang, S. Kainuma, P. Huo and S. Zhuang : Continuous-Wave-Laser Surface Cleaning of High Strength Bolts : Analysis of Bolt Axial Force Loss, Structures, Vol.48, pp.1598–1608, 2023. (IF:
4.1)
Q. Wang, S. Kainuma, P. Huo and R. Morikawa : Quantitative Evaluation of Surface Cleanliness of Weathering Steel Treated by Continuous Wave Laser, Optics & Laser Technology, Vol.158, Part
A, 108864, 2023. (IF: 5.0)
J. Xie, M. Yang, S. Kainuma:Effect of Epoxy Resin Degradation on The Adhesion Strength of CFRP-Steel Join, Journal of Constructional Steel, Vol.30, pp.181-188, 2022.
Q. Wang, S. Kainuma, S. Zhuang, K. Shimizu and M. Haraguchi : Laser Cleaning on Severely Corroded Steel Members: Engineering Attempt and Cleanliness Assessment, Journal of Cleaner Production,
Vol.376, 134224, 2022. (IF : 11.1)
M. Yang, S. Kainuma, J. Xie, W. Liu and Y. Liu:Bond Behavior between CFRP and Corroded Steel Plate Associations with Surface Treatments, Composites Part B, Vol.246, 110280, 2022. (IF : 13.1)
L. Fang, Z. Q. Fu, B. H. Ji and S. Kainuma : Propagation Mode and Characteristics of Fatigue Cracks in Steel Bridge Deck After Drilling Ahead of The Crack Tip, Advanced Steel Construction,
Vol.18, No.2, pp.544-511, 2022. (IF : 1.1)
L. Fang, Z. Q. Fu, B. H. Ji and S. Kainuma : Research on Mixed Mode Crack Drilling Under Out-Of-Plane Shear in Steel Bridge Deck, International Journal of Fatigue, Vol.156, 106679, pp.1-12,
2022. (IF : 6.0)
M. Yang and S. Kainuma:Investigation of Steel Corrosion Near The Air-Liquid Interface in NaCl Solution and Soil Environment,Corrosion Engineering,Science and
Technology,Vol.21,pp.1-13,2021.(IF:2.087)
S. Park,S. Kainuma,T. Ikeda,T. Asano and Y. Morita:Characterizing Steel Surface Features Affected by Abrasive Waterjet Treatment,鋼構造年次論文報告集,Vol.29,pp.585-592,2021.
M. Yang,J. Xie,S. Kainuma and W. Liu:Improvement in Bond Behavior and Thermal Properties of Carbon Fiber-Reinforced Polymer Strengthened Steel Structures,Composite
Structures,Vol.278,pp.1-15,2021.(IF:5.407)
M. Yang,S. Kainuma,W. Nabeshima,M. Yamauchi and B. H. Ji:Synergistic Effect of Corrosion and Residual Stress on Fatigue Cracks of Finger-Type Bridge Expansion Joints,Engineering Failure
Analysis,Vol.131,105894,pp.1-17,2021.(IF:3.114)
L. Fang,Z. Q. Fu,B. H. Ji and S. Kainuma:Research on mixed mode crack drilling under out-of-plane shear in steel bridge deck,International Journal of Fatigue,Vol.156,106679
,pp.1-12,2021.(IF:5.186)
S. Kainuma, M. Yang, J. Xie and Y. S. Jeong:Time-dependent Prediction on the Localized Corrosion of Steel Structure Using Spatial Statistical Simulation, International Journal of Steel
Structures, Vol.21, pp.987-1003, 2021.(IF:1.522)
S. Kainuma, M. Yang, Y. Gao and M. Hashimoto:Long-Term Deterioration Mechanism of Hot-Dip Aluminum Coating Exposed to A Coastal-Atmospheric Environment, Construction and Building Materials,
Vol.280, pp.1-16, 2021.(IF:6.141)
S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi and T. Asano:Characterizing Corrosion Properties of Carbon Steel Affected by High-Power Laser Cleaning, Construction and Building Materials,
Vol.274, pp.1-11, 2021.(IF:6.141)
A.Kim,S. Kainuma and M. Yang:Surface Characteristics and Corrosion Behavior of Steel Substrate Treated by Abrasive Blasting,Metals,Vol.11,Issue 12,2065,pp.1-21,2021.(IF:2.417)
S. Zhuang, S. Kainuma, M. Zhao, H. Manabu and T. Asano : Mechanical Properties and Fracture Mechanism of Laser-Treated Carbon Steel Under Monotonic Tensile Test, Journal of Constructional
Steel, Vol.27, pp.285-291, 2020.
Q. Wang, S. Kainuma and M. Yang : Fundamental Study on The Relationship Between Rust Characteristics and Corrosion Degree of Common Steel, Journal of Constructional Steel, Vol.28, pp.267-273,
2020.
S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi, T. Asano : Investigation on the Peak Temperature and Surface Defects on the Carbon Steel Treated by Rotating CW Laser, Optics & Laser
Technology, Vol.135, pp.1-9, 2020.(IF:3.867)
M. Yang, S. Kainuma, S. Ishihara, A. Kaneko and T. Yamauchi : Atmospheric corrosion protection method for corroded steel members using sacrificial anode of Al-based alloy, Construction &
Building Materials, Vol.234, pp.1-12, 2020.(IF:6.141)
2019
M Yang, S. Kainuma, S.Zhuang, S. Ishihara, A. Kaneko and T. Yamauchi : Cathodic Protection System Applied to Steel Using Fiber Sheet and Al-based Alloy Anode in Atmospheric Environment,
International Journal of Electrochemical Science, Vol.14, pp.9858-9875, 2019.(IF:1.765)
S. Kainuma, M. Yang, S. Ishihara, A. Kaneko and T. Yamauchi : Corrosion Protection of Steel Members Using An Al-Zn Base Sacrificial Anode and Fiber Sheet in An Atmospheric Environment,
Construction & Building Materials, Vol.224, pp.880-893, 2019.(IF:6.141)
Y. Gao, M. Yang, S. Kainuma, S. Ishihara, M.Hashimoto : Electrochemical Properties of Hot-dip Aluminized Coating in Alkaline Environment, Journal of Structural and Materials in Civil
Engineering No.34 p.89-95, 2018.
L.Liu, C.N. Xu, A. Yoshida, D. Tu, N. Ueno, S. Kainuma : Scalable Elasticoluminescent Strain Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis, Advanced Materials
Technology, 1800336, 2018.(IF:7.848)
S. Kainuma, M. Yang, and Y.S. Jeong : Fatigue Behavior Investigation and Stress Analysis for Rib-To-Deck Welded Joints in Orthotropic Steel Decks, International Journal of Steel Structures,
Vol.18 pp.512-527, 2018.(IF:1.522)
2017
S. Kainuma, Y. Yamamoto, J.H. Ahn and Y.S. Jeong : Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer, Structural
Engineering and Mechanics, Vol. 65, No.2, pp.191-20, 2017.(IF:3.524)
Y.S. Jeong, S. Kainuma and J.H. Ahn, W.H. Lee : Assessment of Fatigue Life of Out-Of-Plane Gusset Welded Joints Using 3D Crack Propagation Analysis, Journal of the Korea Institute for
Structural Maintenance and Inspection, Vol.22, No.31, pp.129-136, 2017.
M. Yang, S. Kainuma and Y.S. Jeong : Structural Behavior of Orthotropic Steel Decks with Artificial Cracks in Longitudinal Ribs, Journal of Constructional Steel Research, Vo.141 pp.132-144,
2017.(IF:3.646)
S.Kainuma, M.Yang, Y.S.Jeong, S.Inokuchi, A.Kawabata, D. Uchida : Analysis Investigation for Fatigue Behavior of Rib-to-Deck Welded Joints with Different Structural Parameters in Orthotropic
Steel Decks, Engineering Failure Analysis, Vol.79 pp.520-537,2017.(IF:3.114)
A. Yoshida, L. Liu, D. Tu, S. Kainuma, C.N. Xu : Mechanoluminescent Testing as an Efficient Inspection Technique for the Management of Infrastructures, Journal of Disaster Research, Vol.12,
No.3, pp.506-514, 2017.(IF:0.836)
M. Yang, S. Kainuma and Y.S. Jeong : Analytical Investigations on The Structural Behavior of Orthotropic Steel Deck With Artificial Fatigue Cracks in U-Ribs, Journal of Constructional Steel
Vol.24 489-492, 2016.(IF:3.646)
S. Kainuma, Y. S. Jeong, M. Yang and S. Inokuchi : Welding Residual Stress in Roots Between Deck Plate and U-Rib in Orthotropic Steel Decks, Measurement, Vol.92, pp.475-482, 2016.(IF:3.927)
S. Kainuma, Y. Tsuchihashi, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Anti-corrosive Method with Sacrificial Anode for Steel Members using Al-Zn Alloy Casting
Plate and Fiber Sheet in Atmospheric Environment, Corrosion Engineering, Vol.65, No.9 pp.309-318, 2016.
J.H. Ahn, S. Kainuma, W.H. Lee, Y.S. Jeong, I.T. Kim : Relationships between Imperfections and Shear Buckling Resistance in Web Plate with Sectional Damage Caused by Corrosion, Advances in
Materials Science and Engineering, Vol.2016, Article ID 6467589, 12 pages, 2016.(IF:1.726)
S. Kainuma, M. Yang, Y.S. Jeong, S. Inokuchi, A. Kawabata and D. Uchida : Experiment on Fatigue Behavior of Rib-To-Deck Weld Root in Orthotropic Steel Decks, Journal of Constructional Steel
Research, Vo.119, pp.113-122, 2016.(IF:3.646)
S. Kainuma, Y. S. Jeong, J. H. Ahn, Y. Yamagami and S. Tsukamoto : Behavior and Stress of Orthtropic Deck with Bulb Rib by Surface Corrosion, International Journal of Steel Structure,
Vol.113, pp.135-145, 2015.(IF:3.646)
S. Kainuma, J. H. Ahn, Y. S. Jeong, H. Sugiyama and M. Iwasaki : Evaluation of Structural Responses on Artificial Fatigue Crack for Bulb Rib Orthotropic Deck, Advanced in Structural
Engineering, Vol.18, No.9, pp.1355-1369, 2015.(IF:1.800)
S. Kainuma, Y. S. Jeong and J. H. Ahn : Stress Distribution on the Real Corrosion Surface of the Orthotropic Steel Bridge Deck, Steel and Composite Structures, Vol.18, No.6, pp.1479-1492,
2015.(IF:5.733)
S. Ishihara, S. Kainuma, M. Kinoshita, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Corrosion Protection Effect with Sacrificial Anode for Corroded Steel Members using Porous
Sintered Plate and Fiber Sheet in an Atmospheric Environment, Corrosion Engineering, Vol.63, No.12, pp. 497-505, 2014.
S. Kainuma, J. H. Ahn and Y. S. Jeong : Investigation on The Stress Concentration Effect at The Corroded Surface Achieved by Atmospheric Exposure Test, Materials Science & Engineering A,
Vol.602, No.25, pp.89-97, 2014.(IF:5.234)
S. Kainuma, J. H. Ahn, Y. S. Jeong, T. Imamura and T. Matsuda : Applicability and Structural Response Comparisons for Bearing System Replacement in Suspension Bridge Rehabilitation, Journal
of Constructional Steel Research, Vol.95, pp.172-190, 2014.(IF:3.646)
S. Kainuma, Y. Yamamoto, H. Hayashi, Y. Itoh and W. Oshikawa : Practical Method for Estimating Time-Dependent Corrosion Depth of Uncoated Carbon Steel Plate under Atmospheric Environment
using Fe/Ag Galvanic Couple ACM-Type Corrosion Sensor, Corrosion Engineering, Vol.63, No.2, pp.44-53, 2014.
石原修二,貝沼重信,兼子彬,山内孝郎:大気環境における鋼部材に及ぼす犠牲陽極材の設置方法の影響, 鋼構造年次論文報告集, Vol.21, pp. 181-184, 2013.
林秀幸,貝沼重信,山本悠哉,伊藤義浩:腐食生成物が鋼板さび厚の電磁膜厚計による測定精度に及ぼす影響, 鋼構造年次論文報告集, Vol.21, pp. 862-868, 2013.
木下優,貝沼重信,山上哲示,塚本成昭:コンクリート系材料の地際における鋼部材の腐食挙動に関する研究, 鋼構造年次論文報告集, Vol.21, pp. 185-192, 2013.
J. H. Ahn, S. Kainuma and I. T. Kim : Shear Failure Behaviors of A Web Panel with Local Corrosion Depending on Web Boundary Conditions, Thin-Walled Structures, Vol.73, pp.302-317,
2013.(IF:4.442)
S. Kainuma, J. H. Ahn and I. T. Kim : Corrosion pattern for Critical Shear Buckling Load of A Web Panel with Local Corrosion Damage, Applied Mechanics and Materials, Vol.421, pp.778-783,
2013.
J. H. Ahn, S. Kainuma and T. Imamura : Repair Method and Residual Bearing Strength Evaluation of A Locally Corroded Plate Girder at Support, Engineering Failure Analysis, Vol.33, pp.398-418,
2013.(IF:3.114)
J. H. Ahn, I. T. Kim, S. Kainuma and M. J. Lee : Residual Shear Strength of Steel Plate Girder due to Web Local Corrosion, Journal of Constructional Steel Research, Vol.89, pp.198-212,
2013.(IF:3.646)
J. H. Ahn, S. Kainuma and I. T. Kim : Shear Buckling Strengths and Post Buckling Behaviors of Steel Webs with Local Corrosion, Journal of JSCE, Vo.1, pp.251-261, 2013.
I. T. Kim, M. J. Lee, J. H. Ahn and S. Kainuma : Experimental Evaluation of Shear Buckling Behaviors and Strength of Locally Corroded Web, Journal of Constructional Steel Research, Vol.83,
pp.75-89, 2013.(IF:3.646)
Y. S. Jeong, S. Kainuma and J. H. Ahn : Structural Response of Orthotropic Bridge Deck Depending on the Corroded Deck Surface, Construction & Building Materials, No.43, pp.87-97,
2013.(IF:6.141)
S. Kainuma, K. Utsunomiya, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Influences of Mixing and Porosity Ratios of Porous Sintered Al-Zn Plate and Material Property of Fiber Sheet on
Anticorrosive Effects of Sacrificial Anode for Carbon Steel in Atmospheric Environment, Corrosion Engineering, Vol. 62, No.8, pp.205-218, 2013.
S. Kainuma, Y. Yamamoto, Y. Itoh, K. Utsunomiya and W. Oshikawa : Evaluation Method for Corrosion Depth of Uncoated Carbon Steel and Its Time-Dependence Using Thickness of Corrosion Product
Layer, Corrosion Engineering, Vol. 61, No. 12, pp. 483-494, 2012.
S. Kainuma, Y. S. Jeong and K. Utsunomiya: Numerical Simulations for Time-dependent Corrosion Surfaces of Unpainted Carbon Steel Plates in Atmospheric Corrosive Environments Using Spatial
Statistical Techniques, Corrosion Engineering, Vol. 61, No. 7, pp. 203-212, 2012.
S. Kainuma, J. H. Ahn, Y. S. Jeong and H. Takahashi: Evaluation on Estimation in Characteristics of Fatigue Crack Using Micro-Encapsulated Dye Mixing Paint, Engineering Failure Analysis,
Vol.25, pp.1-12, 2012.(IF:3.114)
S. Kainuma, K. Utsunomiya, S. Ishihara, D. Uchida and A. Kaneko: Fundamental Study on Corrosion Protection of Steel Components with a Sacrificial Anode using a Porous Sintered Plate and Fiber
Sheet in an Atmospheric Environment, Corrosion Engineering, Vol. 60, No. 12, pp. 444-451, 2011.
S. Kainuma, Y. Yamamoto, Y. Itoh and W. Oshikawa : Prediction Method for Mean Corrosion Depth of Uncoated Carbon Steel Plate Subjected to Rainfall Effect using Fe/Ag Galvanic Couple ACM-Type
Corrosion Sensor, Corrosion Engineering, Vol. 60, No. 11, pp. 415-423, 2011.
S. Kainuma and N. Hosomi: Fatigue Life Evaluation of Corroded Structural Steel Members in Boundary with Concrete, International Journal of Fracture, Vol.158, No.1, pp.149-158, 2009.(IF:2.374)
細見直史, 貝沼重信:コンクリート境界部で腐食した鋼構造部材の疲労挙動に関する基礎的研究, 土木学会論文集 A, Vol. 64, No. 2, pp.333-349, 2008.
S. Kainuma and T. Mori: A Study on the Fatigue Crack Initiation Point of Load-Carrying Fillet Welded Joints, International Journal of Fatigue, Vol.30, Issue 9, pp.1669-1677, 2008.(IF:5.186)
S. Kainuma, H. Katsuki, I. Iwai and M. Kumagai: Evaluation of Fatigue Strength of Friction Stir Butt-Welded Aluminum Alloy Joints Inclined to Applied Cyclic Stress, International Journal of
Fatigue, Vol.30, Issue 5, pp.870-876, 2008.(IF:5.186)
S. Kainuma and T. Mori: A Fatigue Strength Evaluation Method for Load- carrying Fillet Welded Cruciform Joints, International Journal of Fatigue, Volume 28, Issue 8, pp.864-872,
2006.(IF:5.186)
貝沼重信, 細見直史: 鋼構造部材のコンクリート境界部における経時的腐食表面性状の数値シミュレーション, 土木学会論文集 A, Vol.62, No.2, pp.440-453, 2006.
2005
I. T. Kim and S. Kainuma: Fatigue Life Assessment of Load-Carrying Fillet Welded Cruciform Joints Inclined to Uniaxial Cyclic Loadings, International Journal of Pressure Vessel and Piping,
Vol.82, pp.807-813, 2005.(IF:2.028)
S. Kainuma and I .T. Kim: Fatigue Strength Evaluation of Load- Carrying Fillet Welded Cruciform Joints with Different Plate Thickness, International Journal of Fatigue, Vol.27, pp.810-816,
2005.(IF:5.186)
I. T. Kim, K. Yamada and S. Kainuma : Fatigue Behavior of Butt Welded Joints Containing Inclined Lack-of-Penetration, Structural Eng./Earthquake Eng., JSCE, No.675/I-55, pp.53-62, 2001.
Y. Toyota, S. Kainuma, S. Park, T. Ikeda, T. Arakawa, T. Koyama : The Application o Abrasive Water-Jet Treatment for Weathering Steel Bridge, 12th International Conference on Bridge
Maintenance, Safety and Management, Copenhagen, Denmark, 2024.
2023
L. Cai, M. Yang and S. Kainuma:Theoretical Analysis on Bond-Slip Models at Interface of CFRP and Corroded Steel Substrate, The 13th Pacific Structural Steel Conference, Chengdu, China, 2023.
J. Xu and S. Kainuma : Utilization of Sodium Polyacrylate Hydrogels in the Sacrificial Anode Cathodic Protection Method for Steel Members at the Atmospheric Environment, The 12th
International Symposium on Steel Structures, Jeju, Korea, 2023.
J. Tang, M. Yang and S. Kainuma : Effects of Temperature on The Galvanic Corrosion Between Carbon Fiber Reinforced Plastic and Carbon Steel, The 12th International Symposium on Steel
Structures, Jeju, Korea, 2023.
S. Park, S. Kainuma, T. Ikeda, Y. Toyota and T. Arakawa : Effect of Nozzle Types During Abrasive Water-Jet Treatment on The Surface Properties Of Carbon Steel, The 12th International
Symposium on Steel Structures, Jeju, Korea, 2023.
L. Cai, M. Yang and S. Kainuma : Effects of Rust-removal Methods on Bond Characteristics of CFRP and Corroded Steel, The 12th International Symposium on Steel Structures, Jeju, Korea, 2023.
S. Park, S. Kainuma, T. Ikeda, Y. Toyota and Y. Morita : Fundamental Study on The Surface Properties of Carbon Steel After Abrasive Waterjet Treatment, 3rd International Civil Engineering and
Architecture Conference, Kyoto, Japan, 2023.
2022
J. Xu, S. Kainuma, K. Takaki, M. Yang and T. Tomoda : Corrosion Protection Method with Sacrificial Anode for Steel Members in Boundary with Ground Using Water Swelling Rubber, 7th
International Conference on Civil Engineering and Materials Science, Chiba, Japan, 2022.
Q. Wang, S. Kainuma, S. Zhuang and P. Huo・Axial Force Behaviors of High-strength Bolt Treated by High Power CW Leaser, 7th International Conference on Civil Engineering and Materials Science,
Chiba, Japan, 2022.
H. Yang, S. Kainuma, M. Yang and T. Asano : Evaluation on Deterioration and Blister Progression of Duplex Layers Between Al-5Mg Thermal Sprayed Coating and Heavy-duty Paint Coating,
Proceedings of 2nd International Civil Engineering and Architecture Conference, Singapore, March, 2022.
S. Park, S. Kainuma, M. Yang, H. Miki and T. Asano : Effectiveness of Laser Treatment on Carbon Steel with Various Forms of Corrosion Pits, Proceedings of 2nd International Civil Engineering
and Architecture Conference, Singapore, March, 2022.
L. Cai, S. Kainuma, M. Yang and R. Guo : Mechanical Behavior of RC Beams Strengthened in Shear with CFRP Grid-epoxy Mortar, Proceedings of 7th International Conference on Civil Engineering
and Materials Science, Chiba, Japan, April, 2022.
2021
Q. Wang, S. Kainuma, M. Yang : Effect of the Abrasive Blast after Pretreatment on Electrochemical Properties of Severe Corroded Weathering Steel, 11th International Symposium on Steel
Structures, Jeju, Korea, 2021.
X. Jiajing, M. Yang, S. Kainuma, W. Liu : The Effect of Surface Treatment and Deterioration of Resin Matrix on the Adhesion of Carbon Fabric-Based Wet Layup System, 11th International
Symposium on Steel Structures, Jeju, Korea, 2021.
S. Zhuang, S. Kainuma, M. Yang, M. Haraguchi and T. Asano : Surface Observation of Laser-Treated Carbon Steel and Application of Laser Cleaning for Corroded Steel Member, 2021 International
Civil Engineering and Architecture Conference, Singapore, 2021.
Y. Gao, S. Kainuma, M. Yang, S. Ishihara, M. Hashimoto and D. Inoue : Corrosion Behavior of Hot-Dip Al Coating Contact with Concrete During Hardening Process of Concrete, 2021 International
Civil Engineering and Architecture Conference, Singapore, 2021.
H. Yang, S.Kainuma, M. Yang, K. Muto and T. Asano : Fundamental Study on Weather Resistance of Overlapping Layers Between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating, 2021
International Civil Engineering and Architecture Conference, Singapore, 2021.
2020
S. Kainuma, S. Zhuang, M. Yang1, K. Toyosawa, T. Asano : Investigation of Corrosion Resistance and Mechanical Properties of Laser-Treated Carbon Steel, 7th International Conference
Integrity-Reliability-Failure, Funchal, Portogal, 2020.
S. Kainuma, M. Yang, H. Yang, K. Muto And H. Miyata : Deterioration and Anti-Corrosion Behaviors of Overlapped Layer between Al-5mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating in
Highly Corrosive Atmospheric Environment, 17th International Conference on Fracture and Damage Mechanics, Mallorca, Spain, 2020. AIP Conference Proceedings, Vol.2309, 020048-1-020048-8, 2020.
M. Dote, M. Yang, S. Kainuma, Y. Kuwahara, K. Yamashita and N. Kai : Initial Corrosion Behavior of Spheroidal Graphite Cast Iron and Rust Evaluation in Atmospheric Environment, Corrosion
& Prevention 2020, Australia, Perth, 2020.
M. Yang, S. Kainuma and H.X. Yang : Corrosion Resistance and Deterioration Behavior of Overlapping Layer Between Thermal Spray Coating and Heavy-Duty Coating, Corrosion & Prevention 2020,
Australia, Perth, 2020.
2019
M. Yang, S. Kainuma, W. Xu : Experimental Study on The Fatigue Fracture Mechanism of Finger Type Expansion Joint, Pacific Structural Steel Conference, Tokyo, Japan, 2019.
A. Kim, S. Kainuma, T. Ikeda, T. Kotera : Effect of Blasting Conditions on Characteristics of Steel Surface and Residual Abrasive Material, Pacific Structural Steel Conference, Tokyo, Japan,
2019.
M. Yang, S. Kainuma, X. Sun : Electrochemical Evaluation on Corrosion Rate of Common Steel Near The Air-Liquid Interface Using An Immersion Sensor, East Asia & Pacific Area Conference
& Expo, Yokohama, Japan, 2019.
S. Zhuang, S. Kainuma, M. Yang, K. Okuda, M. Fukuda : Evaluation of Electrochemical Properties of Laser-Cleaned Carbon Steel Plate, East Asia & Pacific Area Conference & Expo,
Yokohama, Japan, 2019.
Y. Gao, M. Yang, S. Kainuma, S. Ishihara, M. Hshimoto : Electrochemical Properties of Hot-dip Al and Al-45Zn Coating, East Asia & Pacific Area Conference & Expo, Yokohama, Japan,
2019.
A. Kim, S. Kainuma, T. Ikeda, T. Kotera : Effect of Repeated Cyclic Using of Blast Abrasive Material on The Steel Surface Characteristics, The 2019 World Congress on Advances in Structural
Engineering and Mechanics, Jeju, Korea, 2019.
S. Kainuma, M. Yang, Y.S. Jeong : Stress Behaviors for Corroded Surface of Fatigue-Cracked Orthotropic Steel Deck, 3rd International Conference on Structural Integrity and Durability,
Dubrovnik, Croatia, 2019.
2017
M. Yang, S. Kainuma, T. Tomoda, K. Minami : Study on Anti-Corrosive Method with Sacrificial Anode for Embedded Steel Members using Water Swelling Rubber, 9th International Symposium on Steel
Structures, Jeju, Korea, 2017.
S.Kainuma, Y. Yamamoto, A.R. Kim, Y.S. Jeong, J.H. Ahn : Prediction for Corrosion Depth of Weathering Steel Using Corrosion Product Layer, The 2017 World Congress on Advances in Structural
Engineering and Mechanics, Soul, Korea, 2017.
S. Kainuma, J. Du, M. Yang, K. Muto, H. Miyata : Deterioration Behaviors of Overlapping Layers between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating, 16th International
Conference on Fracture and Damage Mechanics, Key Engineering Materials, Florence, Italy, 2017.
2016
S. Kainuma, Y. Yamamoto, Y.S. Jeong : Practical Method for Estimating Time-Dependent Corrosion Depth of Uncoated Carbon Steel Plate Under Atmospheric Environment Using Fe/Ag Galvanic Couple
ACM-Type Corrosion Sensor, 15th International Conference on Fracture and Damage Mechanics, Alicante, Spain, Key Engineering Materials, Vol.713, pp.187-191, Alicante, Spain, 2016.
M. Yang, S. Kainuma, Y.S. Jeong, S. Inokuchi, A. Kawabata, D. Uchida : Analytical Investigation for Stress Response of Orthotropic Steel Deck with Through-Deck Cracks, 5th International
Symposium on Reliability Engineering and Risk Management, pp.445-448, Seoul, Korea, 2016.
G. Mashimoto, S. Kainuma, Y. S. Jeong : Spatial Statistics Simulation of The Corrosion Behavior of The Steel Members on Artificial Coating Defects, 5th International Symposium on Reliability
Engineering and Risk Management, pp.385-388, Seoul, Korea, 2016.
J. Du, S. Kainuma, J. Kobayashi, Y.S. Jeong1, K. Muto, H. Miyata : Fundamental Study on Anti-Corrosion Characteristics of Overlapping Layer Between Thermal Sprayed Al-5Mg Coating and Heavy
Duty Paint Coating, 5th International Symposium on Reliability Engineering and Risk Management, pp.377-380, Seoul, Korea, 2016.
R. Watanabe, S. Kainuma, Y. S. Jeong, J. Kobayashi, W. Oshikawa : Acceleration Coefficients of Cyclic Corrosion Test with Respect to Atmospheric Exposure Test for Uncoated Steel Plates, 5th
International Symposium on Reliability Engineering and Risk Management, pp.381-384, Seoul, Korea, 2016.
K. Yagi, S. Kainuma, M. Hirao : Effect of Heat Capacity on Corrosion Behaviors of Uncoated Carbon Steel Under Various Atmospheric Environments Using Fe/Ag Galvanic Couple Corrosion Monitoring
Sensors, 5th International Symposium on Reliability Engineering and Risk Management, pp.449-452, Seoul, Korea, 2016.
M. Hirao, S. Kainuma1, Y.S. Jeong, J. Kobayashi, X.Guo, T. Shinohara: Influence of Commencing Time of Exposure Test on Corrosion Behavior of Uncoated Common Steel and Weathering Steel, 5th
International Symposium on Reliability Engineering and Risk Management, pp.457-460, Seoul, Korea, 2016.
S. Kainuma, Y. Tsuchihashi, Y.S. Jeong, S. Ishihara : Development of A Corrosion Monitoring Sensor for Structural Steel Member in Boundary With The Ground, 17th International Conference on
Experimental Mechanics, CD-ROM, Rhodes, Greece, 2016.
T. Sakamaoto and S. Kainuma : Fundamental Research on Factors Affecting the Under-Film Corrosion Behavior of Coated Steel Members, 18th International Conference on Chemistry and Chemical
Engineering, CD-ROM, Amsterdam, Netherlands, 2016.
International Scholarly and Scientific Research & Innovation, Vol.10, No.2, pp.232-237, 2016.
M. Yang, S. Kainuma, Y.S. Jeong, A. Kawabata, S.Inokuchi and D.Uchida : Parametric FE Analysis for Fatigue Behavior of Rib-to-Deck Welded Joints in Orthotropic Steel Decks, International
Association for Bridge and Structural Engineering Spring Conference, CD-ROM, Guangzhou, China , 2016.
2015
S. Kainuma, Y.S. Jeong and J. Kobayashi : Influence of Size and Proximity of Paint Coating Defects on Corrosion Behavior of Carbon Steel Plates, 14th International Conference on Fracture and
Damage Mechanics, Budva, Montenegro, Key Engineering Materials, Vol.665, pp.125-128, 2015.
Y. S. Jeong, S. Kainuma and T.Imamura : Corrosivity Evaluation for Each Structural Part of Steel Deck Truss Bridge Before and After Dam Construction, 2015 World Congress on Advances in
Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
M. Michino, S. Kainuma, Y. Yamamoto, Y. S. Jeong, Y. Fujioka, A. Warashina, S. Takagi and M. Uchino : Investigation for Corrosion Characteristic of Structural Members on Unpainted Weathering
Steel Bridge, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
Y. Tsuchihashi, S.Kainuma, Y. S. Jeong, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Corrosion Protection Effect with Scrificial Anode for Corroded Stel Members Using Al-Zn Alloy
Casting Materials and Fiber Sheet, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
J. Kobayashi, S. Kainuma and Y. S. Jeong : Investigation on Correlation and Acceleration Coefficients of Accelerated Corrosion Tests to Atmospheric Exposure Tests, 2015 World Congress on
Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
2014
Y. S. Jeong, S. Kainuma and T. Imamura : Investigation for Effect of Local Corrosion Environment on Structural Member, 4th International Conference on Applied Science and Engineering, 2015
World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Soul, Korea, 2014.
S. Ishihara, S. Kainuma, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Corrosion Protection of Steel Members with a Porous Sintered Al-Zn Plate and Fiber Sheet under the
Atmospheric Environment, 19th International Corrosion Congress, CD-ROM, Jeju, Korea, 2014.
Y. S. Jeong, S. Kainuma and S. Tsukamoto : Assessment on Deformable Behaviors of The Orthotropic Steel Deck Stiffened by Bulb Rib Depending on Corrosion Damage, 7th International Conference
on Thin-Walled Structures, CD-ROM, Soul, Korea, 2014.
S. Kainuma, Y. S. Jeong, N. Yagi and D. Uchida : Fatigue Behavior of Out-of-plane Gusset Welded Joints with One Side Fillet Weld, Sixth International Conference on Engineering Failure
Analysis, CD-ROM, Lisbon, Portugal, 2014.
2013
S. Kainuma, Y. Yamamoto and Y. Itoh : Practical Method for Estimating Corrosion Depth of Uncoated Carbon Steel Using Thickness of the Corrosion-product Layer, 12th International Conference on
Fracture and Damage Mechanics, Sardina, Italy, Key Engineering Materials, Vol.577-578, pp.201-204, 2013.
M. Yamauchi, M. Fujii, S. Kainuma and H. Hirai : Influence of Remaining Lifting Piece on Fatigue Strength of Orthotropic Steel Decks, 2013 International Orthotropic Bridge Conference, CD-ROM,
Sakuramento, USA, 2013.
J. H. Ahn, S. Kainum, I. T. Kim and Y. S. Jeong : Assessment of Shear Behaviors of a Web Panel with Free lower boundary, 2013 AMEE Workshop on Civil Engineering and Materials Science, CD-ROM,
Hong Kong, China, Advanced Materials Research Vol.684, pp.116-119, 2013.
Y. S. Jeong, S. Kainuma and J. H. Ahn : Investigation on Corroded Figuration of Weathering and Carbon Steel Using Spatial Statistics, 2013 AMEE Workshop on Civil Engineering and Materials
Science, CD-ROM, Hong Kong, China, Advanced Materials Research Vol.684, pp 120-124, 2013.
2012
S. Kainuma, J. H. Ahn, Y. S. Jeong and H. Takahashi: Examination of fatigue crack detection using micro-encapsulated dye mixing paint, 1st International Conference of Advances in Structural
Health Management and Composite Structures, CD-ROM, Jeonbuk, South Korea, 2012.
Y. S. Jeong, S. Kainuma and J. H. Ahn: Stress Concentration Factor of Time-Dependent Corroded Surfaces for uncoated Carbon Steel Plates, 1st International Conference of Advances in Structural
Health Management and Composite Structures, CD-ROM, Jeonbuk, South Korea, 2012.
M. Yamauchi, M. Fujii, S. Kainuma and H. Hirai: Influence of Remaining Lifting Piece on Fatigue Strength of Orthotropic Steel Decks, 2013 International Orthotropic Bridge Conference, CD-ROM,
USA, 2012.
S. Kainuma, J. H. Ahn, Y. S. Jeong・H. Sugiyama・A. Tabata and M. Iwasaki: Structural Behaviors of the Fatigue-Cracked Orthotropic Steel Bridge Deck With Bulb Ribs, Fifth International
Conference on Engineering Failure Analysis, CD-ROM, Hague, Netherlands, 2012.
Y. S.Jeong・S. Kainuma and J. H. Ahn: Numerical Evaluation of Time-Dependent Corroded Steel Surface Under Various Atmospheric Environments, Fifth International Conference on Engineering
Failure Analysis, CD-ROM, Hague, Netherlands, 2012.
2011
Y. Itoh and S. Kainuma: Evaluation of Atmospheric Environment and Time-Dependent Corrosion Depth for Unpainted Carbon Steel Using Zn/Ag ACM Corrosion Sensor, Proceedings of 18th International
Corrosion Congress, CD-ROM, Perth, Australia, November, 2011.
S. Kainuma and Y. Itoh: Applicability of an ACM type corrosion sensor to evaluations of corrosive environments in gas piping, Proceedings of The European Corrosion Congress, EUROCORR 2011,
CD-ROM, Stockholm, Sweden, September, 2011.
S. Kainuma and Y. S. Jeong: Spatial Statistical Analyses for Time-dependent Corroded Surfaces of Uncoated Weathering Steel Plates in Various Corrosive Environments, Proceedings of 8th
International Conference on Fracture and Damage Mechanics, CD-ROM, Dubrovnik, Croatia, September, 2011.
2010
S. Kainuma, Y. Mukaigawa, Y. Itoh, Y. Jeong and I. T. Kim: Spatial Statistical Simulation for Time-dependent Corroded Surfaces of Carbon Steel Plates in Various Corrosive Environments,
Proceedings of 4th International Conference on Structural Engineering, Mechanics and Computation, CD-ROM, Cape Town, South Africa, September, 2010.
2009
S. Kainuma, K. Sugitani, Y. Itoh And I. T. Kim: Evaluation Method for Time-Dependent Corrosion Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor, Proceedings of 6th
International Conference on Fracture and Damage Mechanics, Advances in Fracture and Damage Mechanics VIII,pp.417-420, Malta, September, 2009.
H. Matsushita, S. Inokuchi, D. Uchida, A. Kawabata and S. Kainuma: Development of the Experimental Method for Fatigue Cracks on Weld Roots between Deck Plates and U-Shaped Ribs in Orthotropic
Steel Decks, Proceedings of 8th Japanese-German Bridge Symposium, CD-ROM, Germany, August, 2009.
S. Kainuma, K. Sugitani, Y. Itoh and I. T. Kim: Evaluation Method for Time-Dependent Corrosion Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor, Proceedings of 6th
International Conference on Fracture and Damage Mechanics, May, 2009.
2008
S. Inokucchi, S. Kainuma, A. Kawabata and D. Uchida: Field Measurement and Development of an Experimental System for Fatigue-Cracking from Weld Roots between Deck Plate and U-rib in
Orthotropic Steel Decks, Proceedings of 2008 International Orthotropic Bridge Conference, August, 2008.
2007
I. T. Kim, S. Kainuma and N. Hosomi: Corrosion and fatigue behaviors of steel plates in boundary with concrete, Proceedings of 4th Structural Engineering and Construction Conference, CD-ROM,
Melbourne, Australia, September, 2007.
S. Kainuma, N. Hosomi and I. T. Kim: Fatigue Behavior of Corroded Structural Steel Members in Boundary with Concrete, Proceedings of 6th International Conference on Fracture and Damage
Mechanics, July, 2007.
S. Kainuma, N. Hosomi and I. T. Kim: Fatigue Behavior of Corroded Structural Steel Members in Boundary with Concrete, Proceedings of 6th International Conference on Fracture and Damage
Mechanics, Advances in Fracture and Damage Mechanics VI, pp.245-258, Madeira, Portugal, July, 2007.
2005
S. Kainuma, N. Hosomi and S. Hino: Numerical Simulation of the Time-Dependent Corroded Surface of Structural Steel Members in Boundary with Concrete, Proceedings of International Conference
on Structural Condition Monitoring and Damage Identification, CD-ROM, Perth, Australia, December, 2005.
2003
I. T. Kim, Y. Itoh, Y. Kadota, S. Kainuma: Corrosion Characteristic of Painted Steels with Different Surface Preparation, Proceedings of the 7rd Korea-Japan Joint Seminar Steel Bridge,
pp.237-244, August, 2003.
2002
S. Kainuma, N. Hoshomi, I. T. Kim and Itoh: Fatigue Behavior of Corroded Out-of-plane Gusset Welded Joints, Proceedings of the Second International Conference on Advances in Structural
Engineering and Mechanics, CD-ROM, August, 2002.
Y. Itoh, A. Yazawa, T. Kitagawa, S. Kainuma, Y. Yamamoto and Y. Kutsuna: Study on Environmental Durability of Rubber Bearing for Bridges, Proceedings of IABSE Symposium Melbourne, pp.1-7,
January, 2002.
2001
Y. Itoh, A. Iwata, S. Kainuma, K. Kadota and T. Kitagawa: Accelerated Exposure Tests of Durability for Steel Bridges, Proceedings of the Eighth East Asia-Pacific Conference on Structural
Engineering and Construction, CD-ROM, December, 2001.
Y. Itoh, K. Usami, R. Kusama, and S. Kainuma: Numerical Analyses of Steel and Aluminum Alloy Bridge Guard Fences, Proceedings of the Eighth East Asia-Pacific Conference on Structural
Engineering and Construction, CD-ROM, December, 2001.
S. Kainuma, T. Mori and Y. Itoh, Numerical Analysis on Fatigue Failure Modes in Load- carrying Fillet Welded Cruciform Joints, Proceedings of the First International Structural Engineering
and Construction Conference, pp.863-867 , January, 2001.
1999
S. Kainuma, K. Yamada, N. Kagawa, H. Ishii and T. Nishioka: Fatigue Tests of Web Gap Plate with Semi-Circular Cut-Out in Plate Girder Bridge, Proceedings of the 5th Korea-Japan Joint Seminar
on Steel Bridge, pp. 445-455, October, 1999.
I. T. Kim, K. Yamada, S. Kainuma and K. Itoh: Fatigue Test of Tensile Plates with Inclined Fillet Welded Ribs, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp.313-320,
October, 1999.
T. Ojio, H. Shinkai, K. Yamada and S. Kainuma: Recent Development of Bridge Weigh-In- Motion Systems, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp. 257-268, Octorber,
1999.
S. Kainuma, Y. Kawamoto, D. Takamatsu and K. Yamada: Fatigue Tests of Load-Carrying Fillet Welded Cruciform Joints with Root Gap, Proceedings of the Seventh East Asia-Pacific Conference on
Structural Engineering and Construction, pp. 213-218,August, 1999.
T. Mori and S. Kainuma: A study on Fatigue Crack Initiation Points in Load- Carrying Type of Cruciform Fillet Welded Joints, Proceedings of the Seventh East Asia-Pacific Conference on
Structural Engineering and Construction, pp. 219-224, August, 1999.
K. Yamada, S. Kato, A. Okabe, S. Kainuma and T. Ojio: Fatigue Behavior of Tensile Plates with Inclined Fillet Welded Ribs, Proceedings of the Seventh East Asia-Pacific Conference on
Structural Engineering and Construction, pp. 225-230, August, 1999.
N. Kagawa, K. Yamada, S. Kainuma and T. Nakamura: Fatigue Behavior of Improved Welded Cover Plate Detail, Proceedings of the Seventh East Asia-Pacific Conference on Structural Engineering and
Construction, pp. 171-176, August, 1999.
1998
S. Kainuma, K. Yamada, N. Kagawa, T. Nishioka and H. Ishii: Improving Method of Fatigue Life of Web Gap Plate by Semi-Circular Cut-Out, Proceedings of the Sixth East Asia-Pacific Conference
on Structural Engineering and Construction, pp.1713-1718, January, 1998.
K. Yamada, S. Kainuma, M. Suzuki and A. Kondo: Fatigue Tests of Gusset-Welded Specimens with Side Static Load, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering
and Construction, pp.1719-1724, January, 1998.
K. Yamada, N. Okado, Q. Cao and S. Kainuma: Fatigue Crack Growth Behavior of Structural Steel after Periodic Overload and Variable Amplitude Block Loading, Proceedings of the Sixth East
Asia-Pacific Conference on Structural Engineering and Construction, pp. 1761-1766, January,1998.
T. Ojio, K. Yamada, S. Kainuma and T. Obata: Measurement of Wheel Loads Using Orthotropic Steel Deck, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and
Construction, pp. 411-416, January,1998.
1997
K. Yamada, T. Ojio, S. Kainuma and T. Obata: Stress Measurement and Repair of a Fatigue Cracked Box Girder Bridge, Proceedings of IABSE Workshop Lausanne, pp.149-157, March, 1997.
1996
S. Kainuma, K. Amada, N. Kagawa, T. Nishioka and H. Ishii: Improving Effect on Fatigue Strength of Web Gap Plate by Semi-circular Cut-out, Proceedings of Asian-Pacific Symposium on Bridge and
Fatigue, pp.71-78, December, 1996.
K. Yamada, S. Kainuma and T. Ojio: Stress Measurements of Orthotropic Steel Deck of A Box Girder Bridge, Proceedings of Asian-Pacific Symposium on Bridge and Fatigue, pp.55-60, December,
1996.
K. Yamada, S. Kainuma and H. Tanaka: Some Practical Aspects of Fatigue Analysis Using Fracture Mechanics, Proceedings of International Conference on Urban Engineering in Asian Cities in the
21st Century, November, 1996.
K. Yamada and S. Kainuma: Practical Aspects of Fracture Mechanics Applied to Fatigue, Proceedings of the Fourth International Symposium on Structural Engineering for Young Experts, Vol.1,
pp.1-13, November, 1996.
1994
K. Yamada, A. Kondo, S. Kainuma, H. Tanaka and N. Okado: Fatigue Behavior of In-Plane Side Gusset Subjected to Biaxial Loads, Proceedings of the 3rd Korea-Japan Joint Seminar Steel Bridge,
pp.217-219, October, 1994.
学術講演会
2022
Xie Jiajing, Yang Muye,Kainuma Shigenobu:Galvanic corrosion behavior between CFRP and steel under the water film condition,令和3年度土木学会西部支部研究発表会,2022.3
LIU WEIJIE,YANG Muye,KAINUMA Shigenobu,XIE Jiajing:Effect of corroded surface preparation on adhesive behavior of CFRP-steel single strapped joints,令和3年度土木学会西部支部研究発表会,2022.3.
NIU Wenxuan,YANG Muye,XIE Jiajing,KAINUMA Shigenobu:Temperature accelerating effect on the galvanic corrosion between carbon fiber and common steel,令和3年度土木学会西部支部研究発表会,2022.3.
GAO Yang,KAINUMA Shigenobu,YANG Muye,ISHIARA Shuji,HASHIMOTO Mikio,INOUE Daichi:Corrosion Behavior of Hot-dip Al Coated Steel Plate Contact with Concrete in a Highly Corrosive Atmospheric
Environment,令和3年度土木学会西部支部研究発表会,2022.3.
謝嘉靖, 楊沐野, 貝沼重信: Influence of Curing at Different Temperatures on the porosity and Strength of CFRP, 令和3年度全国大会 第76回年次学術講演会, 2021.9.
劉偉傑, 貝沼重信, 楊沐野, 謝嘉靖: Investigation on the bond behavior between different cleaned steel surfaces and carbon fiber sheets, 令和3年度全国大会 第76回年次学術講演会, 2021.9.
Sanghong Park, Shigenobu Kainuma, Muye Yang, Tatsuya Ikeda, Takahiro Asano, Yushi Morita: Fundamental study on steel surface properties by Abrasive Water Jet treatment, 令和3年度全国大会 第76回年次学術講演会,
2021.9.
Maoling Zhao, Shigenobu Kainuma, Aran Kim, Muye Yang : Spatial Point Process and Electrochemical Approach of Detecting Short-Time Corrosion on Steel Substrates after Abrasive Blast Treatment,
材料と環境2021, 2021.5.
岡田紗季, 貝沼重信, 土手一朗, 桑原裕樹, 山下和也: 粉末 X 線回折法とラマン分光法による球状黒鉛鋳鉄の腐食特性の分析, 材料と環境2021, 2021.5.
ZHUANG Shusen, KAINUMA Shigenobu, YANG Muye, KAKU Hou, ASANO Takahiro: Mechanical Properties of High-strength Steel Affected by Laser Surface Treatment, 令和2年度土木学会西部支部研究発表会, 2021.3.
LIU Weijie, YANG Muye, KAINUMA Shigenobu, XIE Jiajing: Fundamental study on the bond strength between different cleaned steel surfaces and carbon fiber sheets, 令和2年度土木学会西部支部研究発表会,
2021.3.
XIE Jiajing, Yang Muye, KAINUMA Shigenobu: Effect of ambient temperature on initial curing stage of CFRP strengthened steel structure by evaluating the porosity and bond strength,
令和2年度土木学会西部支部研究発表会, 2021.3.
PARK SANGHONG, PARK Sanghong, KAINUMA Shigenobu, YANG Muye, IKEDA Tatsuya, ASANO Takahiro, MORITA Yushi: Investigation on Steel Surface Configuration by Abrasive Water Jet Treatment,
令和2年度土木学会西部支部研究発表会, 2021.3.
GAO Yang, KAINUMA Shigenobu, YANG Muye, ISHIARA Shuji, HASHIMOTO Mikio, INOUE daichi: Corrosion Behavior of Hot-dip Al Coated Steel Plate Contact with Concrete in the Atmospheric Environment,
令和2年度土木学会西部支部研究発表会, 2021.3.
ZHAO Maoling, KAINUMA Shigenobu, KIM Aran, YANG Muye: Short-time Corrosion Behavior on Steel Surface after Abrasive Blast Treatment, 令和2年度土木学会西部支部研究発表会, 2021.3.
WANG Qidi, KAINUMA Shigenobu, YANG Muye: Investigation on Corrosion Pit Characteristics of Severe Corroded Weathering Steel, 令和2年度土木学会西部支部研究発表会, 2021.3.
庄樹森, 貝沼重信, 楊沐野, 原口学, 浅野貴弘: Effects of laser treatment on surface morphology and electrochemical properties of carbon steel with pitting corrosion, 第8回九州橋梁, 構造工学研究会シンポジウム, 2020.12.
謝嘉靖, 楊沐野, 貝沼重信: Effect of electrochemical behavior on the galvanic corrosion between carbon fiber sheet and common steel, 第8回九州橋梁・構造工学研究会シンポジウム, 2020.12.
Shusen Zhuang, Shigenobu Kainuma, Muye Yang (Kyushu Univ.); Manabu Haraguchi (Toyokoh Inc.); Takahiro Asano (NEXCO): Influence of Thermal Effects Result from CW Laser Treatment on the
Electrochemical Properties of Carbon Steel, 第67回材料と環境討論会, 2020.10.
Muye Yang, Jiajing Xie, Shigenobu Kainuma, Weijie Liu (Kyushu Univ.): Fundamental Study on the Anisotropic Electrochemical Behavior of Carbon Fiber Used for Structural Strengthening,
第67回材料と環境討論会, 2020.10.
趙茂伶, 貝沼重信, 庄樹森, 楊沐野, 原口学, 浅野貴弘: Electrochemical analysis and SEM-EDX characterization of laser-treated weathering steel plate, 令和2年度全国大会 第75回年次学術講演会, 2020.9.
高揚, 楊沐野, 貝沼重信, 石原修二, 橋本幹雄: Galvanic corrosion behavior between hot-dip 55Al-Zn and Al coatings in the atmospheric environment, 令和2年度全国大会 第75回年次学術講演会, 2020.9.
Muye Yang, Shigenobu Kainuma, Yang Gao, Mikio Hashimoto: Deterioration mechanism of hot-dip Al coating in a coastal-atmospheric environment, 令和2年度全国大会 第75回年次学術講演会, 2020.9.
庄樹森, 貝沼重信, 趙茂伶, 楊沐野, 原口学, 浅野貴弘: Electrochemical, microstructure and XRD study on surface modification effects of laser-treated carbon steel, 令和2年度全国大会 第75回年次学術講演会, 2020.9.
朴相泓, 貝沼重信, 楊沐野, キムアラン: Evaluation on the surface properties and adhesive strength of blasted steel plate used for CFRP/steel joint, 令和2年度全国大会 第75回年次学術講演会, 2020.9.
Xu Weikun, Kainuma Shigenobu, Yang Muye: Comparison of stress concentration factor between actual and predicted corrosion surface configurations by spatial statistics simulation,
令和元年度土木学会西部支部研究発表会, 2020.3.
XIE Jiajing, YANG Muye, KAINUMA Shigenobu: "Fundamental study on the reversible effects of water absorption in epoxy adhesive used in CFRP/ steel joints", 令和元年度土木学会西部支部研究発表会, 2020.3.
PARK Sanghong, KAINUMA Shigenobu, YANG Muye, KIM Aran: Fundamental study on the surface properties and adhesion strength of blast treated steel plate, 令和元年度土木学会西部支部研究発表会, 2020.3.
WANG Qidi, KAINUMA Shigenobu, ZHUANG Shusen, KIM Aran, HARAGUCHI Mamabu: Effect of Blasting and Laser on Substrate Roughness and Coating Adhesion, 令和元年度土木学会西部支部研究発表会, 2020.3.
SUN XIAOTONG, 貝沼重信, 末崎将司, 楊沐野: 水膨潤ゴムを用いた犠牲陽極防食技術に関する基礎的研究, 令和元年度土木学会西部支部研究発表会, 2020.3.
GAO Yang, YANG Muye, KAINUMA Shigenobu, ISHIARA Shuji, HASHIMOTO Mikio: Galvanic corrosion behavior between 55Al-Zn and Al hot-dip coatings in the atmospheric environment, 令和元年度土木学会西部支部研究発表会,
2020.3.
LIU Weijie, YANG Muye, KAINUMA Shigenobu: Effect of brittle and ductile adhesive on the bond behavior of CFRP-steel composite using CZM method, 令和元年度土木学会西部支部研究発表会, 2020.3.
ZHAO Maoling, KAINUMA Shigenobu, YANG Muye, HARAGUCHI Manabu, ASANO Takahiro: Electrochemical properties and surface element analysis of laser-treated weathering steel plate,
令和元年度土木学会西部支部研究発表会, 2020.3.
ZHUANG Shusen, KAINUMA Shigenobu, YANG Muye, HARAGUCHI Manabu, ASANO Takahiro: Surface Preparation of Severe Corroded Steel Member by Laser Irradiation Combined with Pretreatment,
令和元年度土木学会西部支部研究発表会, 2020.3.
2019
楊沐野, Kainuma Shigenobu, Zhuang Shusen: Electrochemical study on the passive cathodic protection for steel bridge using Al-Zn based sacrificial anode, 2019年度全国大会 第74回年次学術講演会, 2019.9.
Shusen Zhuang, Shigenobu Kainuma, Muye Yang, Kazuaki Toyosawa, Yasuo Fukunaga: Effects of Laser Surface Treatment with Different Processing Parameters on Electrochemical Properties of Carbon
Steel Plate, 2019年度全国大会 第74回年次学術講演会, 2019.9.
Yang Gao, Shigenobu Kainuma, Muye Yang, Hanbin Ge: Mechanical Properties of Hot-dip Al and Al-45Zn Galvanized Steel Plates, 2019年度全国大会 第74回年次学術講演会, 2019.9.
Shusen ZHUANG, Shigenobu KAINUMA, Muye YANG: Electrochemical Properties of Cathodic Protection System for Steel Members Using Al-Zn Base Sacrificial Anode, 平成30年度土木学会西部支部研究発表会, 2019.3.
Yang GAO, Shigenobu KAINUMA, Muye YANG: Mechanical Properties of Hot-dip Al and Al-45Zn Galvanized Steel Plates, 平成30年度土木学会西部支部研究発表会, 2019.3.
M.Yang, S.Kainuma, T.Tomoda, K.Minami: Study on Anti-corrosive Method with Sacrificial Anode for Embedded Steel Members in Concrete using Water Swelling Rubber, 平成28年度土木学会西部支部研究発表会,
2017.3.
楊沐野, 貝沼重信, 鄭暎樹, 井口進, 川畑篤敬, 内田大介: Analytical investigation for Fatigue Cracking from Weld Roots between Deck Plate and U-rib in Orthotropic Steel Decks, 平成26年度土木学会西部支部研究発表会, 2015.3.
Y.S.Jeong, J. H. Ahn, S. Kainuma: Stress concentration factors on the corroded steel plate under atmospheric environments, 平成23年度土木学会西部支部研究発表会, 2012.3.
Kato Yusuke, J. H. Ahn, Y .S. Jeong, S. Kainuma, T. Matsuda: Structural behaviors of suspension bridge members according to bearing condition rehabilitation method, 平成23年度土木学会西部支部研究発表会,
2012.3.